Water Resistant Controls
Splash-proof construction |
Pouring Lip
Large pouring lip for high capacity and chunky products. |
Rolled Rim
Re-inforced rolled rim design prevents damage to kettle rim, eliminates “bar rim designs” |
Heating Elements
Welded-in heating elements, (holds vacuum better, won’t leak or loose water) |
Easily Cleaned
Kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish |
Pressure Gauge
Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with “green” and “vent air zone” |
Jacket Rating
50 psi steam jacket rating for higher cooking temperatures |
Safety Valve
50 psi |
Water Level Control
Solid state water level control (no sight glass gauge to break or leak) |
Element Cover
Splash proof element cover with a double gasket seal |
Standard voltage
208-240 volts, 60 Hz, 3 phase, 3 wire. Model KET-6 and KET-12 are field rewirable to single phase |
State of the Art Controls
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) – less than ±1°C variance (ideal for simmering). Operating temperature range from 145° – 260°F (63°C – 127°C) Control panel includes:LED indicator for heat cycle, LED indicator for low water Power ON/OFF switch, Adjustable temperature control dial |
Legs
1 5/8″ O.D. quad-leg supports with level adjustable feet for floor bolting |
Tilt Mechanism
Tilt mechanism of roller bearings and case hardened self-locking worm and segment gear |
50 PSI Steam Jacket Rating (3.5 Bar Boiling Pan) for Faster Cooking
Steam jacket filled with treated water, venting and/or refilling is not required |
Shipping Weights, KW’s, Dims. (W x D X H)
KEL80T 470 lbs (213 kgs) 14.7 kW, 49″ (1232mm) x 42″ (1055mm) x 44″ (1105mm)KEL100T 520 lbs (235 kgs) 14.7 kW, 51″ (1296mm) x 44″ (1033mm) x 45″ (1144mm) |
