KGL25T: Gas steam kettle, tilting


CLEVELAND, Gas Kettle, self-contained, tilting, Model KGL-25-T; 25 gallons, natural or LP gas, 2/3 Steam Jacketed, Type 304 Stainless Steel and supports.  Jacket rated at 50psi with Safety Valve.  Complete with "Splash-Proof" Solid-State Water Level, Temperature, and Safety Low Water Power Cut-Off, including L.E.D. Indicators for Heat Cycle and Low Water Warning.

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KGL25T-Gas-steam-kettle,-tilting
ValidVariantIDs: 46238
ValidSkuIDs: 46243
DocAssetList: kcxkx|qotms|dhkmn|esxloj|cviem|nyoqs
ImgAssetList: jadmpt
VidAssetList: nsaab
Features: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KGL25T-Gas-steam-kettle,-tilting/%
Categories: standardkettles
Attributes: floor
Brands: cle
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: True
DisplayAccessories: True
Previous Page Node Alias:
  • Construction
    • Kettle and all exterior surfaces are a 304 Stainless Steel with a #4 finish.
  • Efficiency
    • Energy efficient (65%), high performance gas-fired heating system for fast heat up and recovery time:Six gallon model with a 34,000 BTU firing rate, and 22,100 BTU directly applied to the product.Twelve gallon model with a 53,000 BTU firing rate, and 34,450 BTU directly applied to the product.
  • Electrical Connection
    • Supplied with cord and plug for 115 volt controls.
  • Gas
    • Standard for natural gas operation
  • Jacket Rating
    • 50 psi steam jacket rating for higher cooking temperatures
  • Legs
    • Support Legs with level adjustable feet, flanged for floor bolting.
  • Pouring Lip
    • Large pouring lip for easier, faster pouring. Heavy duty Rolled Rim design provides strong reinforcement, prevents damages from abuse.
  • Power
    • Twenty-five gallon model with 90,000 BTU firing rate and 58,500 BTU directly applied to the product.
  • Pressure Gauge
    • "Splash Proof" recessed pressure/vacuum gauge.
  • Pressure Regulator
    • Supplied with Gas Pressure Regulator.
  • Self contained
    • Gas tilting kettle is easily installed, only needs a gas connection and a 115 volt outlet.
  • Spark Ignition
    • Automatic Electronic Spark Ignition System.
  • Splash Proof
    • "Splash Proof" solid state control panel for temperature, low water safety, and power "on/off" switch. Accurate L.E.D. indicators for heat cycle and low water warning.
  • Steam Jacket
    • Steam jacket permanently filled with treated distilled water, venting and / or refilling is not required.
  • Temperature Control
    • Precise, consistent temperature control, less than 1°C temperature variance (ideal for simmering). Operating temperature range from 145°- 260°F (63°C-127°C).
  • Tilting
    • Tilt Mechanism of roller bearings and case hardened self-locking worm and segment gear.
W x D x H 42" x 37" x 385/8"
106.7cm x 94cm x 98.1cm
Weight 320 lb
145.1 kg
Power Output 90000.00
Power Input Type Gas - Natural
Primary Power Input 115-120 V x 60 Hz x 1 PH
2" Tangent Draw-Off Valve
316 Stainless Steel Liner
Basket Strainers
(BS & TBS)
Hot and cold water faucet (DPK), or Cold Water (SPK). Requires bracket (FBKT)
Food Strainers
Propane Gas Operation (PG)
Kettle Markings
Lift Off Cover
Measuring Strips
Spring Assist Cover

Brochure & Sell Sheets

Cleveland Buyers Guide

Kettle Family Brochure

CAD Symbols (KCL Cutsheets)

AutoCAd Drawings

Owner Instruction Manual

SE95052 R3 (Kettle 25G Gas) Use and Care.pdf

Menu or Recipe Guide

Kettle Cookbook

Specification Sheets



Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree

Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service:

This web site uses essential cookies. We would like use non-essential cookies so that you are able to use certain features of the web site including but not limited to: log in, buy products, see personalized content, switch between site cultures. It is recommended that you allow all cookies by clicking accept. Further details on our cookies can be found here.