CONTENTSTART

(T)MKDL-T: Direct steam mixer kettle, tilting

JACKETED MIXER KETTLE (3.5 Bar boiling Pan), 2/3 STEAM JACKETED, 50 PSI STEAM on 40-100 gallons, 35 PSI STEAM on 125-150 gallons

CLEVELAND Tilting Mixer Kettle Model (T) MKDL - _____ -T, Console/Leg mounted, Direct Steam Mixer Kettle with _____  psi Steam Jacket Rating. 3 H.P. Hydraulic powered Scraper/Agitator and Bridge Lift. 0-40 rpm Scraper Speed with Variable Scraper to Agitator Ratio from 1-1 to 8-1. Stainless Steel enclosed Mixer Bridge. All Plumbing, Electrical and Hydraulics enclosed in Consoles. Gallon markings, Bayonet Mounted Scraper and Agitator. 3" Butterfly Valve. Hot and Cold Water Faucet. Steam Control Kit. Safety Device prevents high speed starts; Mixer stops when Bridge is lifted. Kettle and all exterior surfaces are Stainless Steel.

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/(T)-MKDL-T-Direct-steam-mixer-kettle,-tilting
ValidVariantIDs: 48283
ValidSkuIDs: 48289
DocAssetList: iudux|xnmcr|hbwqp|qotms|mjurf
ImgAssetList: nuhehx
VidAssetList: nsaab
Features: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/(T)-MKDL-T-Direct-steam-mixer-kettle,-tilting/%
Categories: mixerkettles|standardkettles
Attributes: floor
Brands: cle
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: False
DisplayAccessories: True
  • Mixing
    • 3 HorsePower Hydraulic powered Agitator, Scraper and Bridge Lift.
      Infinitely Variable Scraper Speed Control from 0 to 40 rpm.
      Infinitely Variable Ratio between Scraper and Agitator:
      Agitator rotates from 0 to 8 times the speed of the Scraper.
      Removable (without tools) Nylon Blades scrape the entire Jacketed Surface.
      Safety Device prevents high speed Starts.
      Mixing stops when Bridge is lifted.
      Agitator and Scraper are Bayonet Mounted for easy removal.
  • Steam Control Kit
    • Chrome-Plated & Factory installed
  • Tilt Mechanism
    • Roller bearings and case hardened self-locking worm and segment gear.
  • Power Tilt
    • Standard on 150 gallon model
  • Butterfly Valve
    • 3" diameter Quick Opening
  • Water Faucet
    • Hot and cold water faucet with 3/4" swing spout
  • Condensate Valve
    • With Insulated Handle
  • Steam Jacket Rating
    • 50 psi on 40 - 100 gallon models,
      35 psi on 125 & 150 gallon models
  • Stainless Steel Construction
    • All Plumbing, Electrical, Hydraulics enclosed in Stainless Steel Consoles.
      Enclosed, 10 Gauge Stainless Steel hydraulically operated Mixer Bridge.
      Kettles and all exterior surface are Stainless Steel.
  • Large Pouring Lip
  • Gallon Markings
    • Stamped into Scraper Shaft
  • Electrical
    • Standard 208-240 volts, 60 Hz, 3 phase, 4 wire
  • Standard Voltage
    • 120/208-240 volts, 60 Hz, 3 phase, 4 wire
Covers (MTP)
Product Time/Temperature Controls and Indicators
Automatic Water Cooling (AWC-2)
Alternate Draw-Off Valves
Food Strainer (FS)
Flow Diverter (FD)
Pan Carrier (PCK)
Swing Funnels (SF-1 or SF-2)
Alternate Mounting Systems (wall)
Pressure Reducing Valve (PRV)
Power Tilt (PT) where not standard
Kettle Accessory Kit (KAK) includes:
Clean-up Brush (CB), 36" Kettle Paddle (KP), 36" Kettle Whip (KW), 36" Kettle Brush (KB), Draw-off Brush (DB), 24 oz. Ladle (KL)
Type 316 Stainless Steel Kettle Interior for high acid food products (316-12G)
Water Meter (GMF or LMF) built into system
Accessories for connection to Food Pumps
Leg Extensions (ELTMK)

Owner Instruction Manual

SE95018 R6 (Mixer Vertical Direct Steam) Use and Care.pdf

Menu or Recipe Guide

Kettle Cookbook

Service Manual

SE95018 R6 (Mixer Vertical Direct Steam) Service.pdf

Specification Sheets

MKDL-T

TMKDL-T

CONTENTEND

Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree


Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service: con.kundendienst@manitowoc.com

We use cookies to ensure you get the best user experience and to continuously improve our website. Learn more
ACKNOWLEDGED