MKGL-T: Gas steam mixer kettle, tilting

2/3 STEAM JACKETED MIXER KETTLE (3.5 Bar boiling Pan), 2/3 STEAM JACKETED, 50 PSI STEAM, (40, 60 & 80, GALLONS, 150, 225 & 300 LITERS, per kettle)

Cleveland Gas-Fired Tilting Vertical Mixer Kettle. MKGL-___T ___ gallons, 2/3 steam jacketed, 65% efficient forced air double pass heating system, 50 psi steam jacket ­rating, automatic ignition, solid-state splash-proof controls, 3˝ Diameter Butterfly Valve.

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/MKGL-T-Gas-steam-mixer-kettle,-tilting
ValidVariantIDs: 48313
ValidSkuIDs: 48319
DocAssetList: qotms|cijsx|gvtnk|kwldo
ImgAssetList: xlxxjp
VidAssetList: nsaab
Features: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/MKGL-T-Gas-steam-mixer-kettle,-tilting/%
Categories: mixerkettles|standardkettles
Attributes: floor
Brands: cle
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: False
DisplayAccessories: True
  • Automatic Ignition System
    • 50 psi Steam Jacket Rating.
  • Easy Cleaning
    • Type 304 Stainless Steel with #4 finish on kettle and supports.
  • Flanged Feet
    • Level adjustable.
  • Gas & Electrical
    • Standard for natural gas operation, standard voltage is 120/208-240, 3 phase.
  • Heating System
    • High Efficiency (65%) Forced Air Double Pass Heating System. 140M BTU on 40 gallons, 190M BTU on 60 and
      80 gallons.
  • Insulated Heat Exchanger
  • Mixer Bridge
    • Enclosed, Balanced 10 gauge Stainless Steel - hydraulically operated.
  • Mixing
    • 3 HorsePower Hydraulic powered Agitator, Scraper and Bridge Lift.
      Infinitely Variable Scraper Speed Control from 0 to 40 rpm.
      Infinitely Variable Ratio between Scraper and Agitator:
      Agitator rotates from 0 to 8 times the speed of the Scraper.
      Removable (without tools) Nylon Blades scrape the entire Jacketed Surface.
      Safety Device prevents high speed Starts.
      Mixing stops when Bridge is lifted.
      Agitator and Scraper are Bayonet Mounted for easy removal.
  • Pressure/Vacuum Gauge
    • Recessed and front-mounted.
  • Quick Opening Butterfly Valve
    • 3" diameter.
  • Scraper Shaft
    • With gallon markings.
  • Solid-State Controls
    • Precise temperature controls with less than 1º C temperature differences. LED indicator for Heat Cycle and Low Water Indicator, Power On/Off Switch.
  • Steam Jacket
    • Permanently filled with treated, distilled water. Venting and/or refilling not requiredTwelve gallon model with a 53,000 BTU firing rate, and 34,450 BTU directly applied to the product.
  • Tilt Mechanism
    • Roller bearings and case hardened self-locking worm and segment gear.
Alternate Draw-Off Valve
3" Air Operated Flush Piston Valve. (FPVA3)
(for use with a food pump, replaces 3" butterfly valve) (requires air compressor)
Covers (MTP)
Food Strainer (FS)
Hot & Cold Water Faucet. (DPK)
Kettle Accessory Kit (KAK) includes:
Clean-up Brush (CB), 36" Kettle Paddle (KP), 36" Kettle Whip (KW), 36" Kettle Brush (KB), Draw-off Brush (DB), 24 oz. Ladle (KL)
Pan Carrier (PCK)
Product Time/Temperature Controls and Indicators (DTCI)
Tri-Basket Strainer Support Systems. (TBS
Type 316 Stainless Steel Kettle Interior for high acid food products (316-12G)
Water Meters (GMC1 or LMC1)

Owner Instruction Manual

SE55362 R5 (Mixer Vertical Gas) Use and Care.pdf

Menu or Recipe Guide

Kettle Cookbook

Service Manual

SE55362 R5 (Mixer Vertical Gas) Service.pdf

Specification Sheets



Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree

Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service:

We use cookies to ensure you get the best user experience and to continuously improve our website. Learn more