KEL-SH: Electric short series kettles, stationary


CLEVELAND, Electric Kettle, Tri-leg mounted, short series with 35" rim height, self-contained, stationary, 2/3 Steam Jacketed. Type 304 Stainless Steel Kettle and Supports. Rated 50 psi with Safety Valve; Permanently filled  Steam Jacket. Spring-assisted Domed Cover. (Provide 1.50" Freeboard above batches of rated size.) Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators. Base Mounted for Floor Bolting with three (3), tri-bolt flanges. 2" diameter Tangent Draw-off Valve.

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KEL-SH-Electric-short-series-kettles,-stationary
ValidVariantIDs: 45989
ValidSkuIDs: 45994
DocAssetList: qeprx|iqpkn|lrkcp|qiohm|vzzpi|qotms|xgucm|esxloj
ImgAssetList: wyzohj
VidAssetList: nsaab
Features: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KEL-SH-Electric-short-series-kettles,-stationary/%
Categories: standardkettles
Attributes: floor
Brands: cle
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: False
DisplayAccessories: True
  • Controls
    • Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Control panel includes:LED indicator for heat cycle, LED indicator for low water Power ON/OFF switch, Adjustable temperature control dial
  • Easily Cleaned
    • Kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
  • Element Cover
    • Splash proof element cover with a double gasket seal
  • Heating Elements
    • Welded-in heating elements, (holds vacuum better, won't leak or loose water)
  • Jacket Rating
    • 50 psi steam jacket rating for higher cooking temperatures
  • Legs
    • 1 5/8" O.D. quad-leg supports with level adjustable feet for floor bolting
  • Pouring Lip
    • Large pouring lip for high capacity and chunky products.
  • Pressure Gauge
    • Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"
  • Rolled Rim
    • Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
  • Safety Valve
    • 50 psi
  • Self-Contained
    • Easily installed - needs only an electrical hook-up
  • Standard voltage
    • 208-240 volts, 60 Hz, 3 phase, 3 wire. Model KET-6 and KET-12 are field rewirable to single phase
  • Steam Jacket
    • Steam jacket filled with treated water, venting and/or refilling is not required
  • Water Level Control
    • Solid state water level control (no sight glass gauge to break or leak)
  • Water Resistant Controls
    • Splash-proof construction
316 Kettle Liner
316 Stainless Steel kettle liner for high acid food products (316-G)
Cooking Baskets
Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS)
High wattages (HW) and special voltages
Hot and cold (DPK) or cold only (SPK) water faucet with swing spout. Requires mounting bracket (FBKT)
Food Strainers
Kettle Accessory Kit (KAK)
Clean-up Brush (CB), 36" Kettle Paddle (KP)36" Kettle Whip (KW), 36" Kettle Brush (KB)Draw-off Brush (DB), 24 oz. Ladle (KL)
Kettle Markings
Measuring Strips
Spray Hose

Brochure & Sell Sheets

Cleveland Buyers Guide

Electric Kettle Short Series

Electric Kettles

CAD Symbols (KCL Cutsheets)


Owner Instruction Manual

SE95036 R6 (Kettle Floor Electric) Use & Care.pdf

Menu or Recipe Guide

Kettle Cookbook

Service Manual

SE95036 R6 (Kettle Floor Electric) Service.pdf

Specification Sheets



Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree

Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service:

We use cookies to ensure you get the best user experience and to continuously improve our website. Learn more