CONTENTSTART

KEL: Electric steam kettles, stationary

50 PSI STEAM JACKET RATING (3.5 Bar Boiling Pan), 2/3 STEAM JACKETED, 25, 40, 60, 80 or 100 GAL. (100, 150, 225, 300, or 375 LITERS)

CLEVELAND, Electric Kettle, Tri-leg mounted, self-contained, stationary, 2/3 Steam Jacketed. Type 304 Stainless Steel Kettle and Supports. Rated 50 psi (3.5 Bar Boiling Pan) with Safety Valve; Permanently filled  Steam Jacket. Spring-assisted Domed Cover. (Provide 1.50" Freeboard above batches of rated size.) Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators. Base Mounted for Floor Bolting with three (3), tri-bolt flanges. 2" (50 mm) diameter Tangent Draw-off Valve.

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KEL-Electric-steam-kettles,-stationary
ValidVariantIDs: 45857
ValidSkuIDs: 45863
DocAssetList: ersqk|vzzpi|qotms|ucddd|iqpkn|esxloj|qiohm
ImgAssetList: ytynsn
VidAssetList: nsaab
Features: /Products-Parts-and-Accessories/Products/Cleveland/Steam-Jacketed-Kettles/Floor-Models/KEL-Electric-steam-kettles,-stationary/%
Categories: standardkettles
Attributes: floor
Brands: cle
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: False
DisplayAccessories: True
  • 50 PSI Steam Jacket (3.5 Bar Boiling Pan) for Faster Cooking
    • Steam jacket filled with treated water, venting and/or refilling is not required
  • Easily Cleaned
    • Kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
  • Element Cover
    • Splash proof element cover with a double gasket seal
  • Heating Elements
    • Welded-in heating elements, (holds vacuum better, won't leak or loose water)
  • Jacket Rating
    • 50 psi steam jacket rating for higher cooking temperatures
  • Legs
    • 1 5/8" O.D. quad-leg supports with level adjustable feet for floor bolting
  • Pouring Lip
    • Large pouring lip for high capacity and chunky products.
  • Pressure Gauge
    • Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"
  • Rolled Rim
    • Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
  • Safety Valve
    • 50 psi
  • Self-Contained Electric Steam Source
    • Easily installed - needs only an electrical hook-up
  • Shipping Weights, kw's, Dims. (W x D X H)
    • Model KEL25, 210 lbs (95 kgs), 9.8kW's, 30" (759mm) x 22" (556 mm) x 37" (934mm)Model KEL40, 280 lbs (127 kgs), 14.7kW's, 31" (782mm) x 29" (740 mm) x 40" (1016mm)Model KEL60, 330 lbs (150 kgs), 14.7kW's, 34" (870mm) x 33" (839 mm) x 43" (1093mm)Model KEL80, 385 lbs (175 kgs), 14.7kW's, 38" (959mm) x 37" (931 mm) x 44" (1105mm)Model KEL100, 415 lbs (195 kgs), 14.7kW's, 40" (1023mm) x 39" (997mm) x 45" (1144mm)
  • Standard voltage
    • 208-240 volts, 60 Hz, 3 phase, 3 wire. Model KET-6 and KET-12 are field rewirable to single phase
  • State of the Art Controls
    • Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C) Control panel includes:LED indicator for heat cycle, LED indicator for low water Power ON/OFF switch, Adjustable temperature control dial
  • Water Level Control
    • Solid state water level control (no sight glass gauge to break or leak)
  • Water Resistant Controls
    • Splash-proof construction
316 Kettle Liner
316 Stainless Steel kettle liner for high acid food products (316-G)
Cooking Baskets
(BS)
Cover
Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS)
Electrical
High wattages (HW) and special voltages
Faucet
Hot and cold (DPK) or cold only (SPK) water faucet with swing spout. Requires mounting bracket (FBKT)
Food Strainers
(FS)
Kettle Accessory Kit (KAK)
Clean-up Brush (CB), 36" Kettle Paddle (KP)36" Kettle Whip (KW), 36" Kettle Brush (KB)Draw-off Brush (DB), 24 oz. Ladle (KL)
Kettle Markings
(KM)
Measuring Strips
(MS)
Spray Hose
(PRS-K)

Brochure & Sell Sheets

Cleveland Buyers Guide

Electric Kettle Brochure

CAD Symbols (KCL Cutsheets)

AutoCAD

Owner Instruction Manual

SE95036 R6 (Kettle Floor Electric) Use & Care.pdf

Menu or Recipe Guide

Kettle Cookbook

Service Manual

SE95036 R6 (Kettle Floor Electric) Service.pdf

Specification Sheets

TRI-LEG, ELECTRIC KETTLES25, 40, 60, 80 OR 100 GALLONS

CONTENTEND

Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree


Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service: con.kundendienst@manitowoc.com

We use cookies to ensure you get the best user experience and to continuously improve our website. Learn more
ACKNOWLEDGED